| Display
window to be applied |
The
display window number that has the image to be applied by the color density
slicing function. |
| Data
type |
The
data type in raw or geophysical units that the values entered in fields
Data
range, Range Start, and Range Size will apply to.
When the data type is changed by pressing the toggle button, all the density
slice ranges listed in the List of Density Slice Range field will
also be updated based on the new data type. |
| Add
single range |
| Data
range |
The
minimum and maximum ranges with the color index given in the Color index
field to be added into the List of Density Slice Ranges field. |
| Color
index |
The
color to be used to display the pixels that have data values within the
corresponding density slice range. |
|
| Add
Multiple ranges |
| No.
of ranges |
The
number of density slice ranges to be added into the List of Density
Slice Ranges field. |
| Range
Start |
The
starting range to be used for adding multiple ranges into the List of
Density Slice Ranges field. |
| Range
Size |
The
incremental size to be used for adding multiple ranges into the List
of Density Slice Ranges field. |
|
| Color to mark density slice(s) as blotch |
The color to be applied for assigning density slice ranges to a blotch when
the Mark selected range as a blotch or Mark all ranges as a blotch
option is selected from the Function Menu. |
| Add
(Single range) |
To
combine the values in the Data range and Color Index fields
as an entry and append it at the end of the
List of Density Slice Ranges
field. The color index will automatically increase by 1 after the
button is pressed for next range to be added. |
| Add
(Multiple ranges) |
To
append multiple density slice ranges that are decided by the values given
in fields No. of ranges, Range Start, Range Size,
and Color index at the end of the
List of Density Slice Ranges
field.
The color index will automatically increase by the number of the total
ranges added after the button is pressed for the next range to be added. |
| Display
& Modify Colors |
To
open the Flag Color Set Up Widget
to display and update the colors available for density slice display. |
| Apply |
To
apply the colors to image pixels in the selected display window based on
the order of the density slice ranges listed in the List of Density
Slice Ranges field. Note that the program will not check for
duplicated or overlapped ranges and the minimum and maximum ranges for
each density slice are inclusive when comparing with the image data. |
| Function
Menu |
A
pull down menu button for the following options:
| Paint
selected range |
To
display all pixels that have values inside (inclusive) the density slice
range that is highlighted in the List of Density Slice Ranges field
with the color assigned to that range. |
| Clear
selected range |
To
clear the color on pixels that have been painted based on the information
of the highlighted entry in the List of Density Slice Ranges field. |
| Paint
all ranges |
Same
as the Apply button. |
| Clear
all ranges |
To
clear all colors that have been painted on the selected display window. |
| Mark selected range as blotch |
To
mask all pixels that have values inside (inclusive) the density slice range
that is highlighted in the List of Density Slice Ranges field as
overlay graphics on the selected display window with the color given in
the Color to mark density slice(s) as a blotch field. Once the blotch(es)
are generated, they will stay with the display window and the paint function
will not work on top of the blotches. |
| Mark all ranges as blotch |
To
mask all pixels that satisfy any of the ranges listed in the List of
Density Slice Ranges field as overlay graphics on the selected display
window with the color given in the Color to mark density slice(s) as
blotch field. Once the blotch(es) are generated, they will stay
with the display window and the paint function will not work on top of
the blotches. |
| Quick
selected range on/off loop |
To
display the image with the painted color over pixels defined by the highlighted
density slice range in the List of Density Slice Ranges field on/off
for 10 times. |
| Quick
all ranges on/off loop |
To
display the image with the painted colors over pixels defined by all the
density slice ranges in the List of Density Slice Ranges field on/off
for 10 times. |
|
| Save |
To
save the data type, density slice ranges and their corresponding colors
in red, green, and blue attributes into an ASCII file. In the file,
the first line is the title that contains the data type and followed by
lines with minimum, maximum ranges and its corresponding red, green, and
blue attributes for each entry in the List of Density Slice Ranges field. |
| Restore |
To
restore the data type, density slice ranges and their corresponding colors
from an ASCII file. The Data type, Color index, and
List
of Density Slice Ranges fields, as well as the colors in the
Flag
Color Set Up Widget, will be updated based on the information from
the input file. |
| Remove |
To
remove the highlighted density slice range entry from the List of Density
Slice Ranges field. |
| Clear
All |
To
remove all density slice ranges from the List of Density Slice Ranges
field. |
| Quit |
Close
the Paint - Density Slice Widget. |
